In the granulation chamber, the blended raw materials are put into a granulator, and the raw materials are carried to the mesh (wire mesh) by snake, and pressure is applied to extrude them into granules.
Moisture is evaporated from the extruded granules with a fluid dryer, the granules are prepared with a flash mill (coarse crusher), and the granules and powder are sifted with a vibrating sieve.
In the concentration / extraction room, natural raw materials are extracted and filtered, and the filtered liquid is decompressed (air) with a concentrator to evaporate the water content and increase the concentration.
Weighed raw materials are filled in a special bag.The raw materials weighed here are used for other processes.
In the pharmaceutical packaging room, final packaging is performed based on thoroughly controlled raw materials and materials.
It is a machine that sticks two films together, crimps the four packages at the ends by heating, and fills the contents at that time. We also check the weight of each package using a machine.
After arrival, the passed raw materials are moved to the on-site warehouse from the double door (without directly entering the outside air) and stored.
In the round chamber, raw materials and water are mixed and passed through a rounding machine to form spherical (pills).Freshly made pills contain a lot of water and are soft, so dry them in a pill drying room.
The pills produced in the pill making chamber are dried in the pill drying chamber.Operate with hot air all day and night to dry the pills until they reach a certain moisture content.
The glazing machine in the sugar coating room has a mechanism in which an octagonal drum rotates.Sugar-coated pills and sugar-coated tablets are manufactured by adding raw materials, rotating the machine, and adding coating agents.
It is an automatic filling machine packaging line that can perform from empty bottle → desiccant → raw material filling → buffer packing → cap tightening → labeling (printing stamp) → cosmetic box packaging → weight check → cardboard packing.
In the laboratory, we use various analytical instruments to inspect the quality of manufactured products in line with food hygiene and drug management on a daily basis.
Raw materials used in products are stored in a temperature and humidity controlled warehouse.
The 10-series filling machine can pack 10 sticks at a time. (Granule) Dedicated machine. We manufacture 1 sachets per hour.
Weigh several kinds of raw materials and blend them with a V-type mixer. By rotating the V-shaped part, the raw materials can be blended evenly.
The concentrated liquid is atomized and sprayed in a hot air dryer, and the water is instantly evaporated into a powder (dry extract).The powder (dried extract) is removed from the lumps with a vibrating sieve.